Collections from real exterior job sites.

Visible deterioration along the parapet and edge zone before repair works.

Recorded damage on the balcony underside before removal and restoration.

Preparation stage after weak layers were removed from the exterior edge.

Work area and equipment preparation before intervention on the balcony exterior zone.

Mesh and basecoat application to reinforce the restored exterior surface.

Side view of the rebuilt edge while the repair layer is still visible.

Close-up of the fresh exterior coat after the repair line was shaped.

Detail of the reinforcement mesh wrapped cleanly around the edge.

Base material laid across the parapet before finishing and paint.

Long view of the deteriorated edge before removal and rebuilding.

Closer view of the exposed, weakened material that required repair mortar.

Tight inspection view of the damaged corner and broken surface.

Crew member preparing and applying the repair material on site.

Repair progress underneath the balcony line before the final exterior coat.

Wide overview of the repaired parapet before paint was applied.

Side elevation recorded before the parapet line received its final finish.

Protected working corridor running along the side of the repair zone.

Side detail showing how the repaired band reads at scaffold height.

Detail of the unstable concrete that had to be cleaned and rebuilt.

Access to high facade areas using lift equipment in real urban street conditions.

Real exterior restoration work with lift access and the technical crew on site.

Active facade repair stage with access provided by lift equipment.

Wide project view with visible intervention zones and access equipment.

High-angle view of lift access working alongside a finished exterior wall.

Overall view of upper-floor access using the in-house lift equipment.

Mid-rise apartment block captured during lift-assisted exterior access works.

Lift-assisted work at balcony height on a finished white facade.

Equipment detail showing how tightly the lift can work against the facade.

Lift setup used for underside access and edge repair interventions.

Close-up of mesh reinforcement fixed into place before the next coat.

Main facade elevation during the first visible thermal facade passes.

Wider elevation showing the insulation system extending across the facade.

Corner perspective confirming continuity around edges and returns.

Base-coat detail before the final render evens out the surface.

Close-up of the reinforcement mesh before the facade receives its finish coat.

Full-height scaffold setup for a large-scale exterior works package.

Access setup for facade fronts, inner courtyards, and areas where scaffolding is difficult.

Completed project photographed from street level after exterior finishing.

Legacy crop of the same completed facade kept as part of the full image archive.